Title   : EthernetBlaster.txt
Revision: 1.0

Revision History:
-------------------
Sep. 13, 2006  Rev. 1.0 Initial Release


Loading MCE Firmware Remotely Using Ethernet Blaster and Quartus:
-------------------------------------------------------------

Assuming that EthernetBlaster is configured and attached to MCE:

1. In Quartus, Go to tools and click on Programmer.
2. Then Click on 'Hardware Setup'.
3. Click on 'Add Hardware'.
4. Select 'Ethernet Blaster' for 'Hardware Type'.
   Enter server name or IP address of your ssh server.
   Enter 'password' for 'password'. (this is EthernetBlaster password).
   (Note Server port 1309 should be forwarded to the Ethernet Blaster.)
   Press 'Auto Detect' and it takes few moments and then press OK.
5. Now you are back to Hardware Setup Page with the following item showing 
   up in the list of 'Available Hardware Items':
   Hardware: Ethernet Blaster, Server: xxxxx, Port: /dev/ebhwip

6. Click on 'Currently Selected Hardware' drop down menu and select 
   Ethernet Blaster' and then press Close.

7. Now Press on Auto Detect and you should see the MCE configuration.

Good Luck!